With the development of modern science and technology, computer technology has also been applied here to produce intelligent CNC machine tools, which are widely used in many processing fields. For example, stepper wire cutting machine with high-speed wire is controlled by computer, which can achieve more accurate cutting. Computer control can be realized but automated, to reduce unnecessary costs to the company.
The output frequency of stepper wire cutting machine is relatively stable in other machine tools, and the processing frequency can be controlled in the background. Each machine tool will have a core control unit, only through this unit to control the use of the entire machine, the motor can also be automatically identified, you can control the speed and pressure, which is intelligent for us to reduce the waste of time.
Today, we will introduce the operation skills of stepper wire cutting machine:
1, processing accuracy requirements are high, in the case of edge processing, due to high precision requirements, in order to improve accuracy, improve product quality, so although the molybdenum wire is very fine, but in the cutting calculation length also to add the molybdenum wire radius, this error can not be ignored.
2, when cutting aluminum, only need to prepare a shorter conductive block, if the amount of cutting aluminum is relatively small. When processing, it is necessary to brush a little kerosene on the molybdenum wire every half an hour, and the purpose of brushing kerosene is to clean the oxidation on the molybdenum wire. You can also use something else to remove the aluminum oxide from the surface. When cutting aluminum, the molybdenum wire can be kneaded into a ball, and then the ball is flattened, and finally placed on the guide block, which is very easy to use and the cost is very low.
3. Check the conductive block regularly. If the groove mark is too deep, it should be replaced, because the groove mark is too deep, it will break the cutting wire. If you see the cutting wire into a spiral shape, it also needs to be replaced immediately, otherwise it will affect the quality of the cutting process product.
4, when cutting a large workpiece, it is necessary to see whether the length of the machine tool is enough to cut the workpiece, and calculate it first.
stepper wire cutting machine https://www.talentcnc.com/Medium-speed-STEPPER-wire-cutting-machine
