Stirring method for more than 30bbl brite tanks


more than 30bbl brite tanks https://www.haishunmachinery.com/BREWING/BriteTank/

.

The materials of more than 30bbl brite tanks are all made of high-quality stainless steel such as 304, 321, 316L, 2205, etc. The mixing method is mostly frame-type mixing to ensure that the materials are evenly mixed in a short time; at the same time, frame-type, anchor-type, and paddle-type can be selected as needed. wait.

1. When taking more than 30bbl brite tanks materials, the mixing needs to be stopped for more than 2 minutes, and it can only be stopped after confirming that there are no other safety hazards. Do not use hard metal containers that are easy to fall off and pull them out of the reactor for sampling to avoid damaging the glass-lined surface.

2. During the dripping and heat preservation process, the temperature and pressure of the reactor should be checked frequently, the dripping materials should be comprehensively observed, and the conditions of the materials in the reactor should be comprehensively observed, and corresponding records should be made. When the temperature, pressure and material interface of the reactor are abnormal, corresponding measures must be taken promptly to maintain normal reaction conditions to prevent equipment, personal and other failures and dangers.

3.more than 30bbl brite tanks need to turn on the circulating water of the condenser before heating. The drain bypass valve should be opened first, and then the steam valve should be slowly opened to drain away the accumulated water, then the bypass valve should be opened, and a drain should be installed to perform drain work to preheat the jacket.

4. After adding materials into more than 30bbl brite tanks, the relevant valves should be readjusted to the appropriate opening and closing position, and stirring can be started. In the initial stage, the stirring operation should be monitored. If abnormal phenomena such as noise and vibration are found in the reactor, Emergency parking is required. If solid powder is added to the reaction kettle, it must be fully dissolved before stirring can be started.

more than 30bbl brite tanks https://www.haishunmachinery.com/BREWING/BriteTank/