Permit me to begin by providing a synopsis of the online conversation for the purpose of assisting other readers who may be following along. Speaker spikes are miniature cones that can be affixed to the base of your studio monitors or the speakers that are part of your entertainment system in order to raise them up and away from the surface they are resting on.
We made use of a collection of speaker spikes made of solid brass that we had acquired from Amazon. After that, the 3m tape that was provided with the initial packaging was used to adhere these spikes to the bottom of our Martin Logan Speakers. They claim that it can support a weight of up to 45 kilograms, which is equivalent to 100 pounds. Because of their diminutive size and the fact that I am confident the material can support the load, it is not recommended to use these particular speaker spikes with huge towers. However, I am confident the material can support the load. Despite this, I am certain that the material is capable of bearing the weight of the load. If the surface you intend to place your speakers on is not completely flat or level, you can adjust the height of your speakers by using the adjustable best speaker spikes that come with your speakers. The process of installation is quite simple; all that is required of you is to position the strips of 3M tape in the location in which you want them to be installed, and then adhere them in that position.
Placing an iPhone on top of the speaker and analyzing the resulting vibrations allowed us to accurately measure the speaker's tremors. Because of this, we were able to evaluate the speaker spikes. The results of that examination are presented in the following paragraphs.
As can be seen, there is evidence of vibrations occurring in lower frequency ranges. These vibrations can be felt. Despite this, we do believe that this will take place, and you can almost feel the anticipation building. However, we do not want any of our delicate electronics, such as our turntables or any other electronic devices, to be exposed to all of that good bass. The use of spikes on the speakers has been suggested as a potential solution to this issue for a considerable amount of time. In order for vibrations to move through it at a faster rate, the objective is to decrease as much of the surface area as is humanly possible; does it actually achieve this goal?
Speaker Spike Test Results
Despite the fact that we were not entirely sure what to expect specifically from these tests, the outcomes were not what we had anticipated at all. The speaker spikes did work. They have less of an effect on the transfer of high frequencies, but they are more effective at dampening the vibrations of low frequencies that are transferred to the speaker stand. Having said that, this does make sense due to the fact that sound is amplified as it travels from the smaller end of a cone to the larger end of the cone as it moves through the cone. The sound of a trumpet is produced in this way by the horn of the instrument. It is only reasonable to suppose that the amplitude of vibrations that are moving towards the point where there is a higher concentration will decrease as they approach this point. I can only say that this is my best guess about how the physics works because there hasn't been a lot of research done on how sound behaves as it travels through a solid cone and approaches a singularity. This is why I can only say that it is my best guess. In spite of this, the amount of low-frequency vibrations was found to have decreased when it was measured directly on the stand itself.
You can see the difference between the two images by hovering your mouse over the picture. The measurement that was taken from the stand can be seen in Image 1, while the measurement that was taken from the speaker can be seen in Image 2.
Do speakers spikes work?
At the very least, they accomplish what you want them to accomplish, which is to isolate the low-frequency vibrations from the rest of your equipment. This is exactly what you want them to do. I believe that isolating low frequency vibrations is of the utmost importance because, in terms of causing problems with other components, these vibrations appear to be the most destructive. This is especially true in regard to turntables, as the stylus has the potential to jump even when subjected to only moderate levels of vibration. In the end, the response to the question of whether or not best speaker spikes are effective is determined by the specific objective that you have in mind. Do you feel a lot of vibrations coming from the bass that are getting transferred to your equipment rack? You ought to discover that the spikes are of assistance to you. On the other hand, if you have a problem with high frequencies wreaking havoc on other items, you will probably not find that these products are very helpful in resolving that problem. The reason for this is that high frequencies can cause a lot of damage to other things.
