economic precision surface grinding machine machine tool operating procedures:
1. Turn on the main power supply of the machine tool, the controller switch, the 24V step drive power switch and the high pulse power switch.
2. Calculate the coordinate point programming program based on the drawing size and the actual situation of the workpiece, pay attention to the clamping method of the workpiece and the diameter of the molybdenum wire, and select a reasonable cutting position.
3. Turn on the wiring motor, water pump motor and high-frequency switch on the control panel.
4. Place the coarse adjustment switch in the automatic position and unplug the feed switch to enter the processing stage. During processing, further adjust the fine adjustment switch and software fine adjustment to the most stable state for processing.
5. After processing, you should first turn off the high-frequency pulse switch and water pump switch of the machine tool in order, and then turn off the coarse-closing wire storage drum switch. If you want to shut down the machine with a brake, just press the red button of the main power switch.
2. Precautions for using economic precision surface grinding machine:
1. Before turning on the machine, check whether all electrical components are loose. If there are broken wires or components falling off, please notify a professional for repair in time.
2. Check the tension of the molybdenum wire.
3. Check whether the guide wheel is damaged and change the position of the working surface in time to prevent the molybdenum wire from being broken.
4. Check the wire retaining rod and if there is a communication groove, adjust the position of the working surface in time to prevent the molybdenum wire from being stuck.
5. Check that there should be enough lubricating oil in the lubrication parts of the machine tool.
6. Daily maintenance:
6.1. No. 30 engine oil should be added to the transverse feed gearbox and longitudinal feed gearbox once per shift.
6.2. For each drive shaft of the wire storage drum, the screw nut of the wire storage drum, and the guide plate of the wire storage drum, No. 30 engine oil should be added to each plate once.
economic precision surface grinding machine https://www.talentcnc.com/aiproduct-item-259.html
