Electrical Chain Saw is more common in garden machinery tools, this is because of its powerful function, the operation is relatively simple, fast hand. However, it is precisely because of its simple operation that many users have not paid attention to the normalization of operation, in fact, this is not right. In the process of using Electrical Chain Saw, non-standard operation may cause failure. Once failure occurs, it will not only have a bad impact on the equipment, but also may cause danger. In addition, it should be noted that once the Electrical Chain Saw failure, it must be repaired in time, of course, before maintenance, it is still necessary to find out where the fault occurred, and the specific together with the footsteps of Dehua to see it!
Electrical Chain Saw faults can be divided into four categories:
The more common fault: after the switch is turned on, there is no movement or slow reaction, this class can check the fault according to the equipment manual, generally the battery is in poor contact or the battery is out of power.
Small fault: the screw or fastener in the link part is loose, and this kind of fault is found to need to stop the operation and shut down the power supply, be sure to wait until the Electrical Chain Saw completely stop rotating for maintenance, and then restart after adjustment.
Uncommon fault: This kind of fault is generally the internal parts are damaged, in the use of abnormal is found to need to stop the inspection, this kind of fault inspection is still more troublesome. Because it takes a lot of time to determine where the fault is, generally half an hour to an hour, find the fault and then repair it.
Serious failure: has affected the use, such as deformation, bending, fracture or failure, this has been very serious, basically can not continue to work, and non-technicians are not good to repair. At this time, it is necessary to contact the manufacturer in time and return to the factory for the manufacturer to repair.
Electrical Chain Saw https://www.keylead.cn/Electrical-Chain-Saw
